●本系列換網器采用整體結構，具有體積小，流道短的特點，可與不同標準的擠出機配套使用

●采用壓力驅動密封技術，密封間隙可自動補償，滿足任何聚合物材料的高擠出產量生產，不停機、不漏料

●液壓泵站配有儲壓裝置，雙工位快速換網時間≤2秒

●在壓力25-30Mpa，溫度高達300℃的情況下，不影響其性能

●過濾面積￠38-￠803mm任選。

●適用用于片材、板材、管材、覆膜、吹膜、電線、電纜、型材、造粒等適合所有的熱塑性塑料。

. This series use overall structure with small dimension and short flow channel. It can be used with kinds standard extruders.

. Adopt pressure-driven sealing system design. Sealing gap can be compensated automatically. It can meet any polymer high production capacity with no stop and leakage.

. Screen changing process can complete in 2 seconds with pressure accumulator.

.At the condition of 25-30Mpa pressure and high temperature 300℃, it can work well.

. Filtration area diameter range ￠38-￠803mm

. It can be used for sheet, plate, pipe, film, blown film, wire, cable, profile, granulation and  most of thermoplastic materials.

 

 注：實際產量取決于物料的流動性、過濾精度以及物料的純凈度。參數如有變動恕不另行通知。

Note: The actual output depends on material flow ability, filter fineness and material purity. Specifications are subject to change without prior notice.